# Garage Door Spring Replacement Cost

Source: https://garagedoorrepaircalculator.com/costs/spring-replacement/
Publisher: Garage Door Repair Calculator — an independent price reference. Not a contractor.

## Summary

- **Typical national range:** $275–$480 installed (parts plus labour)
- **Emergency / after hours:** $390–$680
- **Time on site:** 1–2 hours
- **Scales with door size:** yes
- **Expected life:** Roughly 10,000 cycles standard, 20,000+ high-cycle

Replacing the torsion springs is the most common garage door repair there is, and the one with the widest gap between a fair quote and a padded one. This is the full installed price — both springs, parts and labour — and every factor that moves it.

## Why it fails

Springs are matched to the weight of your specific door and installed as a pair. They accumulate cycles at exactly the same rate, so when one goes, the other is at the same point in its life. Replacing only the broken one means paying a second full service call — trip charge included — within months.

## What you are paying for

The second spring adds parts cost but almost no labor, which is why the pair costs far less than two separate visits.

## Signs you need this

- One spring has already broken and the other is the same age
- Both springs show rust, gapping, or visible stretch
- The door has been getting slower or noisier over months
- You do not know how old the springs are and the door is past ten years

## Can you do it yourself?

**Not a homeowner job.** Same hazard as a single spring, doubled. Wound torsion springs are the most dangerous component on a residential garage door and are not a homeowner job under any circumstances.

## Cost by state

| State | Torsion springs — replace both | vs national |
| --- | --- | --- |
| Hawaii | $390–$680 | +42% |
| District of Columbia | $365–$635 | +32% |
| Alaska | $360–$625 | +30% |
| New York | $360–$625 | +30% |
| California | $350–$615 | +28% |
| Massachusetts | $340–$595 | +24% |
| Connecticut | $330–$575 | +20% |
| New Jersey | $330–$575 | +20% |
| Washington | $325–$565 | +18% |
| Maryland | $315–$545 | +14% |
| Oregon | $315–$545 | +14% |
| Rhode Island | $315–$545 | +14% |
| Colorado | $310–$540 | +12% |
| New Hampshire | $305–$530 | +10% |
| Delaware | $295–$520 | +8% |
| Illinois | $295–$520 | +8% |
| Nevada | $295–$520 | +8% |
| Vermont | $295–$520 | +8% |
| Virginia | $295–$520 | +8% |
| Minnesota | $290–$510 | +6% |
| Maine | $290–$505 | +5% |
| Arizona | $285–$500 | +4% |
| Pennsylvania | $285–$500 | +4% |
| Florida | $280–$490 | +2% |
| Montana | $280–$490 | +2% |
| Utah | $280–$490 | +2% |
| Idaho | $275–$480 | — |
| Wisconsin | $270–$475 | -1% |
| Wyoming | $270–$475 | -1% |
| North Dakota | $270–$470 | -2% |
| Texas | $270–$470 | -2% |
| Georgia | $265–$465 | -3% |
| Michigan | $265–$465 | -3% |
| North Carolina | $265–$460 | -4% |
| New Mexico | $260–$455 | -5% |
| Ohio | $260–$455 | -5% |
| South Carolina | $260–$455 | -5% |
| Tennessee | $260–$455 | -5% |
| Indiana | $260–$450 | -6% |
| Missouri | $260–$450 | -6% |
| Nebraska | $260–$450 | -6% |
| South Dakota | $260–$450 | -6% |
| Iowa | $255–$445 | -7% |
| Kansas | $255–$445 | -7% |
| Louisiana | $255–$445 | -7% |
| Kentucky | $255–$440 | -8% |
| Alabama | $250–$435 | -9% |
| Oklahoma | $250–$435 | -9% |
| West Virginia | $250–$430 | -10% |
| Arkansas | $245–$425 | -11% |
| Mississippi | $240–$420 | -12% |

## Common questions

### Why does the pair cost so much less than two separate visits?

Because almost all of the cost is labour and the trip charge, not the spring itself. The technician is already there with the door unloaded and the winding bars in hand — adding the second spring is a few extra minutes of work against a whole second visit later.

### How do I know the springs are sized right for my door?

A correctly sprung door stays put when you lift it halfway by hand with the opener disconnected. If it slams down or flies up, the springs are wrong for the door weight — worth checking after any replacement, and worth asking the technician to demonstrate before they leave.

---

These are planning ranges, not quotes. Only an on-site inspection produces a firm
price. Method: https://garagedoorrepaircalculator.com/how-it-works/